This tutorial lists many common roof types, roughly in ascending order of complexity, and gives examples of each one.
Wikipedia provides additional information and diagrams here, and from that page there are links to other articles with lots more reference images.
Please note that roof terminology is not rigidly defined. Usages vary from place to place, and from one architect or builder to another. One person may describe the alternative mansard roof design shown on these pages as a “bonnet roof”, for example, and this is understandable given the similarities between the two roof shapes.
Roof designs also vary, so that there may be no discernible difference between a “hipped roof with a gable end” and a “link dormer”, or between one person”s “skillion roof” and another”s “shed roof”. Every element of every roof type may be adjusted, and most roof types can be combined in different ways, producing unlimited numbers of local variants.
1 Video 2 Common roof designs 2.1 Flat roof 2.2 Terrace 2.3 Shed roof 2.4 Gable roof 2.5 Saltbox roof 2.6 Clerestory roof 2.7 Hipped roof 2.8 Half-hipped roof 2.9 Dutch gable 2.10 Skillion roof 2.11 Gambrel roof 2.12 Gull wing roof 2.13 Mansard roof 2.14 Bell-cast roof 2.15 Saw-tooth roof 2.16 Monitor roof 2.17 Helm roof 2.18 Butterfly roof 3 Other materials 3.1 Green roof 3.2 Thatched roof 4 Dormers 4.1 Wall dormer 4.2 Blind dormer 4.3 Dormer gallery
Video < edit>
Common roof designs < edit>
Flat roof < edit>
Blacksmith”s building from a pre-Village and Pillage Update plains village.
Đang xem: How to make roofing in minecraft
This roof type may also be referred to as a parapet roof, meaning a roof with a parapet (a low protective wall) around it.
Making a flat roof is trivial, but making a flat roof that looks real takes a little more effort. Take a leaf from the blacksmith”s book from the village and add a border; that little extra effort greatly helps make this simple structure look more attractive.
Always try to use different block types for a roof border. Use slabs, as in the illustration, or backwards stairs, forming a gutter, or add a border of blank signs all the way round the building, or a parapet, thus making the roof area safe to use. The only thing you shouldn”t do is to just use the same materials as for the rest of the building.
These roofs have one flaw: They are generally a good place for mobs to spawn at night if not lit up or covered in slabs, buttons, or pressure plates.
Terrace < edit>
A partly covered terrace.
If the design of a house offers easy access to an area of a flat roof, that roof area may be paved so that it is useful as an outdoor living area. Terraces may be large or small, covered or open, or a mixture of the two.
A balcony may be very similar to some terrace designs, but it is not part of a roof, and the balcony may or may not have a roof covering over it; as a rule of thumb, the area under a balcony will also be outdoors, whereas the area under a terrace tends to be indoors.
Shed roof < edit>
A shed roof.
A shed or sloped roof is sloped in one direction only. This design is rarely used as the main roof on inhabited buildings, although it may be seen on part of such a building. If it is a building”s sole roof it is more likely to be found on cheap, simple or utilitarian buildings such as sheds, animal houses, outhouses or storage barns.
Gable roof < edit>
Simple gable roof design, not suitable for buildings with widths greater than about 12 blocks.
A gable roof, also known as a pitched or peaked roof, is an inverted “V”. This roof design is common in the original villages produced by wtbblue.com”s terrain generator, and is useful for small buildings. The building in the image is 6×10 meters. Allowing for the very thick walls one gets in wtbblue.com that give a usable internal space of 4×8 meters; sufficient for one or two rooms. A building of this size integrates well with village buildings.
Saltbox roof < edit>
A saltbox roof.
Alternative saltbox roof.
A saltbox roof is a type of gable roof where one slope is much longer than the other. Buildings with this roof type quite often have two stories at the front and one at the back; adding a lean-to back roof to an existing structure in this manner is a simple way to extend a building. The front and back slopes of a saltbox roof may have the same pitch, but as the second picture shows this is not always the case.
Clerestory roof < edit>
A clerestory or half-monitor roof.
A clerestory window is a window too high to see out of which lets light in to a building. Hence clerestory roof is a generic term referring to a roof shaped to include clerestory windows. This roof shape may also be referred to as a half-monitor roof.
Hipped roof < edit>
A building with a simple hipped roof.
A pyramidal roof.
Read more: wow predictive combat operations databank
A hipped roof (or hip roof) is sloped in both directions. There is far less roof volume (for an attic) available under a hipped roof. Placed on a square building, a hipped roof produces a distinctive pyramid-shaped roof.
Half-hipped roof < edit>
A half-hipped roof.
Another way to merge roof styles is to use a gable roof for part of the height of a roof, and then switch to hipped for the remainder. This produces two variant roof types, the half-hipped roof and the Dutch gable or gablet roof, depending on which part uses which style.
For a half-hipped roof, you can “switch style” at any point, producing a mostly gable roof with a very small hipped area, or mostly hipped. This half-hipped roof image shows 3 rows of gable roof and 2½ rows of hipped roof above it (including the layer of slabs at the roof peak).
Note how these buildings are significantly larger than the NPC village buildings, and yet if they were much smaller their variant roof styles would be difficult to recognize.
Dutch gable < edit>
A Dutch gable or “gablet” roof.
The Dutch-gable is a hipped roof with a (usually) small gable at the top. It”s very common to put a small window in the gable part, but in this image we have used wooden planks for clarity.
Note that “Dutch gable” is the common US term for this roof type, but this may sometimes cause confusion with the Flemish gable design described in the roof decorations tutorial.
Skillion roof < edit>
Skillion roof covering a porch.
A skillion roof is a roof surface which slopes in a single direction. It may continue the slope of an existing roof, or be separate. A skillion roof may sometimes be called a shed roof or lean-to. This image of a skillion roof shows a 1 in 1 pitch on the right hand side and a 2 in 1 pitch on the left hand side, allowing the roof to extend out over the porch without dropping to ground level.
Gambrel roof < edit>
A Gambrel roof. The dark wood shows the profile of a 45° roof for comparison.
A gambrel roof has two or three distinct roof pitches – steep lower down, and shallow or flat higher up. The result is that the usable volume under the roof is greatly increased. Some gambrel roofs may have one or more curved sections. If such a roof is partly curved and partly straight, it”s usually the lower portions that are given curves first. These roofs would be hard to model well at normal wtbblue.com scales.
Gambrel roofs may also be known as kerb, curb or Dutch Colonial roofs.
Gull wing roof < edit>
A gull wing roof.
A gull wing or “gullwing” roof has a shallow pitch lower down, and steep higher up. These roof designs often have extensive overhangs to help shade the building.
Mansard roof < edit>
A mansard roof with three distinct roof pitches.
An alternative mansard roof. (Better versions welcome)
A mansard roof is similar to a gambrel roof. It has two or possibly three distinct roof pitches. Most of the roof is steep, but it always has a shallow or flat section higher up, and like a hipped roof it has slopes in both the North-South and East-West directions. Some mansard roofs may use curved roof sections, more commonly on the lower portions. Hence the usable volume under the roof is greatly increased. Very large buildings may have several floors under a mansard roof.
Some mansard roofs resemble bonnet roofs, having a shallow lower pitch which extends beyond the curtain walls. The key features of a mansard roof are its squarish profile and its increased volume of roof space compared to a gable roof and other simpler designs. Note also that as the main point of a mansard roof is to make the roof volume usable, it will almost certainly have dormers built in to it to provide lighting.
In wtbblue.com, buildings need to be quite large before mansard roofs begin to look appropriate, especially as it”s common to have an extended parapet around them. The building shown on the left is about 16×20 meters. With a parapet and just a 1m walkway all the way around, that would become 20×24m.
Bell-cast roof < edit>
A bell-cast roof.
A bell-cast roof has two distinct roof pitches, but it is shallow lower down, and steep higher up. It may also be referred to as a bonnet roof. Some bonnet roofs may be partly or fully curved, but this is hard to model at normal wtbblue.com scales.
Saw-tooth roof < edit>
A saw-tooth roof.
A saw-tooth roof has a series of ridges with dual pitches on either side. The steeper surfaces are glazed and face away from the equator to shield workers and machinery from direct sunlight. This type of roof is commonly used for deep plan buildings and factories. It may also be referred to as a northlight roof. Note that to be a “proper” saw-tooth roof in wtbblue.com, the windows should all face North or all face South, and you should be consistent about which direction you choose.
Monitor roof < edit>
A monitor is a raised structure running along the ridge of a double-pitched roof, with its own roof running parallel to the main roof. The long sides of monitors often contain louvers or clerestory windows to help light or ventilate the building. A monitor that runs the full length of the building is more commonly found on larger structures such as barns, warehouses and factories, and is rarely seen on domestic buildings. However, a monitor does not necessarily have to run the entire length of a roof.